Motorola AT Commands G24-L Informations techniques télécharger pdf (Page 39)

July 15, 2008 G24 KJAVA User’s Guide 4-1

Chapter 4: Development and Maintenance

General

The following log types are available:

AMS logs - Issued by unit components (AMS, KVM, and Native Code)

MIDlet logs - Issued by running MIDlet (stdout)

JTool Commands

JTool commands enable external communication to G24 KJAVA module over serial connection

(See “JTool Manager”section for more information).

When switching to JTool, running MIDlet is stopped.

A command line consists of JTool command string and a carriage return (commands are not case

sensitive):

G24 KJAVA module echoes the input to the terminal.

The G24 KJAVA JTool commands are listed in Table 4-1.

Table 4-1: JTool Commands

Subject JTool commands Action Notes

JTool JT Returns "JTool OK" when alive

and listening.

Download OEMdownload Prepares the unit for downloading

a MIDlet.

Reflash OEMreflash Switch to boot mode - ready for

reflash.

Only for UART1 with

PCLoader tool.

KDWP OEMkdwpON Sets KDWP flag 'ON'. KDWP flag is checked

when running a MIDlet.

If it is 'on' then the

MIDlet will run in

debug mode.

OEMkdwpOFF Sets KDWP flag 'OFF' (future

use).

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 83 84

Pas de commentaire

Motorola AT Commands G24-L Informations techniques Page 39