Motorola Canopy Backhaul Module Guide de l'utilisateur télécharger pdf (Page 25)

45 Mbps Backhaul User Guide

Issue 3, December 2004 Page 24 of 113

Step 3: Arrange conductors as shown in

Figure 7 and cut to length

Step 4: Insert conductors and crimp

Figure 6 Completed ODU connector

Both ends of the ODU cable are terminated in the same way. Repeat steps 2, 3, and 4 for the PIDU end of the

cable. Note: The PIDU end of the cable does not employ a cable gland.

Figure 7 RJ45 Pin Connection

5.7.2 Making the Connection At The ODU

The following procedure describes how connection is made at the ODU. It is often easier to carry out this

procedure on the ground or a suitable surface prior to mounting the ODU.

Ensure no power is connected to the PIDU or present on the cable before connecting the ODU.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 112 113

Pas de commentaire

Motorola Canopy Backhaul Module Guide de l'utilisateur Page 25