Motorola CB3000 - Client Bridge - Wireless Access Point Guide de l'utilisateur télécharger pdf (Page 89)

Administrative Options 5-15

d. Click the ICMP Ping Test button. Results of the ping test displays in the Status box.

Figure 5.12 Ping Test with Associated Device Status Example

Use the results to determine whether the device association should be maintained or replaced by a

device association providing better network coverage and signal strength.

• Ping the Host – The CB3000 can verify its link with its host by sending WNMP ping packets to the host’s

IP address. To conduct an ICMP ping test with the CB3000’s host:

a. Enter the IP address of the host.

b. Specify the length of each data packet transmitted to the target device during the test. This

increment is defined in bytes. If you don’t know, enter a large arbitrary amount like 500.

c. Specify the number of ping packets to transmit.

d. Click the Comm Connection Test

button. Results of the test displays in the Status box.

Figure 5.13 Ping Test with Host Status Example

e. Use this information to determine whether the host connection should be maintained or replaced by

a host connection providing better connectivity with the CB3000.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 105 106

Pas de commentaire

Motorola CB3000 - Client Bridge - Wireless Access Point Guide de l'utilisateur Page 89