Motorola SB5102 Guide de l'utilisateur télécharger pdf (Page 16)

SB5102 Cable Modem User Guide 9

Introduction Before You Begin Installation & Configuration FAQ

Troubleshooting

Glossary

License

Cabling and Startup for a Single User

Allow 5 to 30 minutes to power up the first time because the SB5102 cable modem must

find and lock on the appropriate channels for communications.

1 Be sure your computer is on and the cable modem is unplugged.

2 Connect one end of the coaxial cable to the cable outlet or splitter. Connect the

other end of the coaxial cable to the CABLE connector on the cable modem.

Hand-tighten the connectors to avoid damaging them.

3 Plug the power cord into the POWER connector on the cable modem and the

electrical outlet. This turns the SB5102 cable modem on. You do not need to unplug

it when not in use.

4 Check that the lights on the cable modem front cycle through this sequence:

• Power flashes during the self-test and changes to solid green when the self-test

is successfully complete.

• Receive flashes while scanning for the receive (downstream) channel and

changes to solid green when it is connected.

• Send flashes while scanning for the send (upstream) channel and changes to

solid green when it is connected.

• Online flashes while the cable modem downloads configuration data and

changes to solid green when the download is complete.

SB5102 cable modem

To electrical

outlet (step 3)

To cable

outlet

(step 2)

Always connect coaxial cable to the wall outlet first.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 46 47

Pas de commentaire

Motorola SB5102 Guide de l'utilisateur Page 16