Motorola 3347 Manuel d'utilisateur télécharger pdf (Page 161)

100

101

161

Factory Reset Switch

Lose your password? This section shows how to reset the Netopia Gateway so that you

can access the conﬁguration screens once again.

☛ NOTE: Keep in mind that all of your settings will need to be reconﬁgured.

If you don't have a password, the only way to access the Netopia Gateway is the following:

1. Referring to the following diagram, ﬁnd the round Reset Switch opening.

2. Carefully insert the point of a pen or an unwound paperclip into the opening.

3. Hold the button in until the “Power” LED turns RED and then hold it in until it turns

GREEN again.

If you don't hold it this long, the normal conﬁguration will be cleared, but not all the con-

ﬁguration info (default settings, etc.) – in some cases you may NOT want to clear all the

default settings, as well. This entire process takes approximately 10 seconds: approxi-

mately ﬁve seconds for the Gateway to reboot and the LED to turn RED; then approxi-

mately three seconds for it to turn GREEN again.

4. This will reset the unit to factory defaults and you will now be able to reprogram the

Netopia Gateway.

Factory Reset Switch: Push to clear all settings

Rear View

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 350 351

Commentaires sur ces manuels

Pas de commentaire

Motorola 3347 Manuel d'utilisateur Page 161

Commentaires sur ces manuels