Motorola Netopia Embedded Software Spécifications télécharger pdf (Page 243)

243

CONFIG Commands

This section describes the keywords and arguments for the various CONFIG commands.

Remote ATA Conﬁguration Commands

Motorola Netopia® ﬁrmware supports conﬁguration of a maximum of four Motorola Netopia® ATA proﬁles,

which are stored in the Gateway’s conﬁguration database. When a Motorola Netopia® ATA is discovered,

the Gateway compares the MAC address of the ATA with one of the existing proﬁles stored in the database.

If there is a match, the conﬁguration is downloaded to the Motorola Netopia® ATA, and the ATA is restarted.

Once the Motorola Netopia® ATA is restarted, it comes up with the newly downloaded conﬁguration.

set ata proﬁle [ 0... 3 ] ata-option [ on | off ]

Enables or disables the remote ATA conﬁguration option for the speciﬁed ATA conﬁguration proﬁle to be

stored in the Gateway.

set ata proﬁle [ 0... 3 ] ata-mac-addr

MAC_addr

Speciﬁes the MAC address of the ATA for the speciﬁed conﬁguration proﬁle.

set ata proﬁle [ 0... 3 ] ata-qos-enable [ on | off ]

Enables or disables QoS for the speciﬁed proﬁle.

set ata proﬁle [ 0... 3 ] ata-dhcpc-enable [ on | off ]

Enables or disables DHCP client service for the speciﬁed proﬁle.

set ata proﬁle [ 0... 3 ] ata-dhcpc-hostname

string

Speciﬁes a DHCP client hostname for the speciﬁed proﬁle.

set ata proﬁle [ 0... 3 ] ata-dhcpc-vid-enable [ off | on ]

Enables or disables a DHCP client vendor ID for the speciﬁed proﬁle.

set ata proﬁle [ 0... 3 ] ata-dhcpc-vid

string

Speciﬁes a vendor ID for the speciﬁed proﬁle when ata-dhcpc-vid-enable is on.

set ata proﬁle [ 0... 3 ] ata-static-wan-ip

ip_addr

Speciﬁes a static WAN IP address for the speciﬁed proﬁle.

set ata proﬁle [ 0... 3 ] ata-static-wan-subnet-mask

subnet_mask

Speciﬁes a static WAN IP subnet mask for the speciﬁed proﬁle.

1 2 ... 238 239 240 241 242 243 244 245 246 247 248 ... 367 368

Pas de commentaire

Motorola Netopia Embedded Software Spécifications Page 243