Motorola M68CPU32BUG Manuel d'utilisateur Page 13

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 68
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 12
HARDWARE PREPARATION AND INSTALLATION
M68332BCC/D 2-3 MOTOROLA
REV 1
Table 2-1. Jumper Header Types
Jumper Header
Type
(1)
Symbol Description
three-pin with jumper Three-pin jumper header with jumper and designated as JX (X =
the jumper header number). To change the factory jumper header
configuration, move the jumper to the two desired pins.
two-pin with jumper Two-pin jumper header with jumper, designated as JX (X = the
jumper header number).
1. J7 and J8 are designated as jumper headers but they are in fact connectors.
Table 2-2. Jumper Header Summary
Jumper
Header Type Description
J1
(1)
2
1
Jumper between pins 1 and 2 (factory default); disables (grounds) the on-board
RAM (U1 & U3) voltage standby power (VSTBY) input pin. VSTBY maintains
the data in RAM if BCC power (+5Vdc) is turned off.
No jumper; enables the on-board RAM VSTBY function. The VSTBY voltage
must be supplied by the user.
J2
(1)
3
2
1
Jumper between pins 1 and 2 (factory default); enables the on-board RAM
chips (U1 & U3).
Jumper between pins 2 and 3; disables the on-board RAM chips. This allows
the chip select to be used with off-board memory.
J3
(1)
3
2
1
Jumper between pins 1 and 2 (factory default); enables the on-board EPROM at
U2.
Jumper between pins 2 and 3; disables the on-board EPROM at U2. This allows
the chip select to be used to boot from off-board memory.
J4
(1)
2
1
Jumper between pins 1 and 2 (factory default); connects the on-board transmit
data serial communication drivers to the MC68332 MCU device.
No jumper; disconnects the on-board transmit data serial communication drivers
from the MC68332 MCU device. This allows connection of the MCU serial port
to off board logic.
1. These jumper headers are shorted by a trace on the solder side of the PCB (between the pins), as
shown in the schematics. Cut the trace when using the optional feature provided by the jumper.
Vue de la page 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 67 68

Commentaires sur ces manuels

Pas de commentaire