Motorola AP-650 Series Guide d'installation télécharger pdf (Page 15)

AP-650 Series Thin Access Point: Installation Guide

2.6 External Antenna Model Wall Mount Instructions

Wall mounting requires hanging the AP-650 Thin Access Point along its width or length using the pair

of slots on the bottom of the unit. The AP-650 can be mounted onto any plaster, wood, or cement wall

surface using the provided wall anchors when necessary. The illustration shows a lengthwise mount

2.6.1 Wall Mount Hardware

• Two wide-shoulder Phillips pan head self-tapping screws

• Two wall anchors

• Safety wire (recommended) and security cable (optional)

NOTE In the event that the original mounting screws are lost, the following

screws can be used instead: (ANSI Standard) #6-18 X 0.875in. Type A or

AB Self-Tapping Screw, or (ANSI Standard Metric) M3.5 X 0.6 X 20mm

Type D Self-Tapping Screw.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 37 38

Pas de commentaire

Motorola AP-650 Series Guide d'installation Page 15