Motorola AP-6521 Series Guide d'installation télécharger pdf (Page 24)

24 AP-6521E Access Point

14. Select Apply to commit the updates to the selected Access Point’s configuration.

15. Expand the Configuration menu item and select Wireless.

The Wireless screen displays fields where Radio Settings and Wireless LAN settings can be defined.

Motorola Solutions recommends default radio settings remain as is for the Access Point’s basic setup. For

information on using WiNG Express beyond this initial setup, refer to the Motorola Solutions WiNG

Express Users Guide. The guide is available at https://portal.motorolasolutions.com/Support/US-EN

In respect to the Radio Settings, the professional installer should be aware of the following:

• The Channels available for configuration are channels for which the product is approved in its

selected country. The professional installer must ensure the product is set to operate under

conditions, and on channels, approved by country regulations.

• Selecting Smart as the Power setting automatically configures radio power to not exceed the

maximum power allowed by the defined country. For static power settings, the professional installer

must ensure the configured power levels are compliant with local and regional regulations. The

county selected automatically limits the maximum output power that can be set.

• For external antenna model Access Points, configure the Antenna Gain based on the antenna used

in the deployment. The set gain value should include the antenna gain, along with any additional

components, such as extension cables used between the Access Point and the antenna.

In respect to the Wireless LAN settings, the professional installer should be aware WiNG Express

Access Points ship with a default WLAN (WINGExpress). However, this WLAN does not provide adequate

authentication to protect from unauthorized user access. Motorola Solutions recommends an additional

WLAN configuration be created and validated before deleting default WLAN.

NOTE The above example includes a field for setting the antenna gain. This

setting is only available for external antenna model Access Points and

does not display for internal antenna model Access Points.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 43 44

Pas de commentaire

Motorola AP-6521 Series Guide d'installation Page 24