Motorola AP6532 Guide d'installation télécharger pdf (Page 31)

AP6532 Series Access Point: Installation Guide

15. Set the following DHCP and Static IP Address/Subnet information for the WAN interface:

• Use DHCP - Select the checkbox to enable an automatic network address configuration

using the access point’s DHCP server.

• Static IP Address/Subnet - Enter an IP Address/Subnet and gateway for the access

point's WAN interface. These are required fields

• The port connected to the WAN - Select the port used as the physical access point

connection to the external network. This ports available differ depending on the access

point model deployed. Access point models with a single port have this option fixed.

• Enable NAT on the WAN Interface - Select the checkbox to allow traffic to pass between

the access point's WAN and LAN interfaces.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 57 58

Pas de commentaire

Motorola AP6532 Guide d'installation Page 31