Motorola WU830G Guide de l'utilisateur télécharger pdf (Page 24)

CONFIGURATION SECTION 3

WU830G 3-7

3 To ensure that the list is current, click Refresh. The updated list

of access points is displayed.

4 Select the Network Name to which you want to connect.

5 Click Connect. Your WU830G connects to that network.

The following table describes the information provided on the Site

Monitor window:

Column

Heading

Description

Network Name Displays the name of the access point.

Signal Displays the signal strength indicated by percent.

Channel Displays the channel frequency used by the

access point. The possible channels are

1 through 11.

Security Displays the security type used by the access

point. The possible options are None, WEP,

WPA-PSK, and WPA.

BSS Type Displays the network type. The possible options

are Infrastructure or Ad-Hoc.

Mode Displays the wireless mode available with the

access point. Possible modes are G or B.

MAC Displays the MAC address of the access point.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 58 59

Pas de commentaire

Motorola WU830G Guide de l'utilisateur Page 24