Motorola STARLINE SERIES Instructions d'exploitation télécharger pdf (Page 20)

Overview 2-9

BLE*/* Installation and Operation Manual

Model Description Function

SFE-*-*

Starline Forward Equalizer This bandwidth specific (750 or 870 MHz) equalizer

compensates for cable properties in 1 dB increments

from 2 dB through 22 dB. The appropriate value must

be installed. See the product catalog for additional

information.

SRE-*-*

Starline Return Equalizer This bandwidth specific equalizer compensates for

cable attenuation in 1 dB increments from 0 dB through

12 dB for S-split (2 dB increments for all other splits).

The appropriate value must be installed. See the

product catalog for additional information.

SCS-*

Starline Cable Simulator This simulator compensates for cable properties. The

appropriate value must be installed. See the product

catalog for additional information.

JXP-*B

Fixed attenuator This pad attenuates excessive input signal. It is

available in 1 dB increments from 0 dB through 26 dB.

The appropriate value must be installed.

JXP-TH*C

Thermal attenuators This option compensates for gain changes with

temperature in the return path.

FTEC

Fast Transfer Electronic

Crowbar

This option is used for overvoltage protection and

replaces the existing surge protector.

LL-BLE-HMS-*/*

Status monitor module This module enables monitoring of the unit’s operating

parameters by the LIFELINE status-monitoring system.

This accessory also requires the deep housing cover.

BLE-LID/SM

Deep housing cover This optional cover is required to contain the LIFELINE

status monitor module.

RCB87

Response Correction Board This optional board compensates for system roll-off at

870 MHz. The BLE*/* is shipped with a jumper in this

location which you can replace when additional

response correction is required.

JXP-RPC

Return Path Correction board This optional board provides additional flatness

response correction in the return path for systems that

must meet especially stringent return path flatness

requirements.

ICS-II

Ingress Control Switch This option enables remote monitoring, isolation, and

reduction of ingress on the return path by providing

signal attenuation of 6 dB or cutoff of 38 dB typical. The

unit is shipped with a jumper in this location.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 48 49

Commentaires sur ces manuels

Pas de commentaire

Motorola STARLINE SERIES Instructions d'exploitation Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Amplificateurs audio Motorola STARLINE SERIES