Motorola LM2000 Guide d'installation télécharger pdf (Page 32)

32 DC 900-1331F

Freeway 2000/4000 Hardware Installation Guide

Step 3:

Check that the shipping carton includes the following:

• Freeway unit

• Power cord

• Cable with a 9-pin and a 25-pin connector on each end (if your Freeway has an

MVME 2600 CPU board)

• Three-headed loopback cable(s), one per Freeway ICP

• Optional hard or ﬂoppy disk drive

• SCSI II-style high-density termination connector (unless you have a Freeway with

an MVME 162 CPU 8A non-SCSI board)

• Anti-static strap

• Freeway 2000/4000 Hardware Installation Guide (this manual)

• Freeway User’s Guide

• Loopback Test Procedures

• Software distribution media (may be shipped separately along with the applicable

programmer’s guide and other supporting documentation)

Note

You do not have to wear the anti-static strap while connecting

Freeway to the network, but it should be kept with the unit for

future use when you are making upgrades to the system that

require access to the inside of the enclosure.

Save this note:

Match

equipment list

to 1332

preface.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 85 86

Pas de commentaire

Motorola LM2000 Guide d'installation Page 32