Motorola 2.1 Guide d'installation Page 898

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 952
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 897
24 - 20 WiNG CLI Reference Guide
24.1.14 mesh
interface-radio Instance
Configures radio mesh parameters
Supported in the following platforms:
RFS4011
Syntax
mesh [client|links <1-6>|portal|preferred-peer <1-6> <MAC>]
Parameters
Example
rfs4000-880DA7(config-profile-default-rfs4000-if-radio1)#mesh preferred-
peer 2 11-22-33-44-55-66
rfs4000-880DA7(config-profile-default-rfs4000-if-radio1)#mesh client
RFS4000-880DA7(config-profile-default-RFS4000-if-radio1)#show context
interface radio1
description Primary\ Radio
data-rates custom basic-mcs0-7
mesh client
wlan 1 bss 1 primary
wlan wlan1 bss 1
antenna-gain 12.0
guard-interval long
aggregation ampdu tx-only
antenna-mode 2x2
dynamic-chain-selection
antenna-diversity
airtime-fairness prefer-ht weight 6
[client|links <1-6>
|portal|preferred-peer <1-6>
<MAC>]
client – Enables operation as a client. (Scan for mesh portals, or
nodes that have connectivity to portals, and connect through
them)
links <1-6> – Configures the maximum number of mesh links that the
radio will attempt to create
<1-6> – Specify the maximum number of mesh links from the radio
portal – Enables operation as a portal. (Begins beaconing immediately,
accepting connections from other mesh nodes. Typically the node with a
connection to the wired network)
preferred-peer <1-6> <MAC> – Configures a peer device to which
connection should be preferred
<1-6> – Configures the priority at which the peer node will be added
<MAC> – Specify the MAC address of the preferred peer device
(Ethernet MAC of either an AP or a controller with onboard radios)
Vue de la page 897
1 2 ... 893 894 895 896 897 898 899 900 901 902 903 ... 951 952

Commentaires sur ces manuels

Pas de commentaire