Motorola AT Commands G24-L Informations techniques télécharger pdf (Page 40)

Power On/Off Operation

14 G24-L Module Hardware Description November 15, 2008

Figure 2-3 illustrates the power-on process using the ON_N signal.

Figure 2-3: ON_N Power On Timing

Turning the G24-L On Using IGN

To turn on G24-L, the IGN signal must be asserted high. The IGN signal must remain high for the

duration of the G24-L operation. G24-L powers down when the IGN signal is returned to its low

state.

Figure 2-4 illustrates the power-on process using the IGN signal.

Figure 2-4: IGN Power On Timing

Important: The Ignition signal functionality is disabled in the G24-LC charger model. This

signal is used for external charger supply application and doesn't function as

specified herein. Refer to “Battery Charger Interface” on page 47 for more

information.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 105 106

Pas de commentaire

Motorola AT Commands G24-L Informations techniques Page 40