Motorola SG 2000 Instructions d'exploitation télécharger pdf (Page 2)

Caution

CautionCaution

Caution

These servicing instructions are for use by qualified personnel only. To reduce the risk of electrical shock, do not perform any servicing other than that

contained in the Installation and Troubleshooting Instructions unless you are qualified to do so. Refer all servicing to qualified service personnel.

Special Symbols that Might Appear on the Equipment

Special Symbols that Might Appear on the EquipmentSpecial Symbols that Might Appear on the Equipment

Special Symbols that Might Appear on the Equipment

This is a class 1 product that contains a class IIIb laser and is intended for operation in a closed environment with fiber

attached. Do not look into the optical connector of the transmitter with power applied. Laser output is invisible, and eye

damage result. Do not defeat safety features that prevent looking into optical connector.

This product contains a class IIIb laser and is intended for operation in a closed environment with fiber attached. Do not look

into the optical connector of the transmitter with power applied. Laser output is invisible, and eye damage can result. Do not

defeat safety features that prevent looking into optical connector.

This symbol indicates that dangerous voltage levels are present within the equipment. These voltages are not insulated and

may be of sufficient strength to cause serious bodily injury when touched. The symbol may also appear on schematics.

The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important installation,

servicing, and operating instructions in the documents accompanying the equipment.

For continued protection against fire, replace all fuses only with fuses having the same electrical ratings marked at the

location of the fuse.

FCC Compliance

FCC ComplianceFCC Compliance

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Installation Manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at his/her own expense. Any changes or modifications not expressly approved by Motorola could void the user’s

authority to operate this equipment under the rules and regulations of the FCC.

Canadian Compliance

Canadian ComplianceCanadian Compliance

Canadian Compliance

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respects toutes les exigences du Règlement sur le matériel brouilleur du Canada.

transformation or adaptation) without written permission from Motorola, Inc.

Motorola, Inc. reserves the right to revise this publication and to make changes in content from time to time without obligation on the part Motorola, Inc.

to provide notification of such revision or change. Motorola Inc. provides this guide without warranty of any kind, either implied or expressed, including,

but not limited, to the implied warranties of merchantability and fitness for a particular purpose. Motorola, Inc. may make improvements or changes in

the product(s) described in this manual at any time.

________________________________________________________________________________________________________________________________

AT&T and the AT&T logo are registered trademarks of AT&T Corporation.

MOTOROLA, the stylized M logo, and STARLINE are registered trademarks of Motorola Inc.

All other product or service names are the property of their respective owners.