Motorola MICOM-2ES Spécifications télécharger pdf (Page 49)

Appendix

Static Operation

A-1. Scope

This Appendix provides instructions for preparing the micomTrooper for static

operation using a dipole or long-wire antenna.

A-2. Procedure

When using a micomTrooper transceiver with a dipole or long-wire antenna, the

antenna must be directly connected to the transceiver RF connector. Therefore, it

is necessary to disconnect the connection between the transceiver and ATU.

In the following procedure, refer to Figure A-1.

Cat. No. 6886863J01 A-1

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 55 56

Pas de commentaire

Motorola MICOM-2ES Spécifications Page 49