Motorola ASTRO W5 Guide de l'utilisateur télécharger pdf (Page 56)

General Radio Features

Programming a Scan List

To program a scan list, operator-selectable scan list members first

must be enabled in the radio programming by a qualified radio

technician.

Adding a Channel to the Scan List

1 Press and hold until the scan indicator blinks and a

good-key chirp is heard.

2 Using the Mode knob (W4) or Mode rocker switch (W5, W7,

W9), locate the channel to be added.

Note: If the desired channel resides in a different zone, press the

Zone up

 or Zone  down button to change zones, then

use the mode changer to find the desired channel.

3 Press to add the channel.

4 Scroll through of the available priority choices, and press

to choose one.

The new channel becomes a member of the scan list assigned

to the selected channel when scan list programming was

entered.

Note: If a scan list is full, you will hear a bad-key chirp each time

you press , and the desired channel will not be

assigned to the list.

5 Press either or to exit scan list

programming and return to normal scan operation.

Scan

Sel

Scan HOME

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 157 158

Pas de commentaire

Motorola ASTRO W5 Guide de l'utilisateur Page 56