Motorola AP-650 Series Guide d'installation télécharger pdf (Page 15)

Altitude 4600 Series Access Point Installation Guide 15

1 If required, install and attach a security cable to the unit’s lock port.

2 Plug the Ethernet cable into the unit and to a switch with an 802.3af-compatible

power source.

3 Face the bottom of the T-bar with the back of the case.

4 Orient the case by its length and the length of the T-bar.

5 Rotate the case in place 45 degrees clockwise, or about 10 o’clock.

6 Push the back of the case onto the bottom of the T-bar.

7 Rotate the case 45 degrees counter-clockwise. The clips click as they fasten to the T-

bar.

8 Verify the unit has power by observing the LEDs.

External Antenna Wall Mount Instructions

Wall mounting requires hanging an Altitude 4600 Series Access Point along its width or

length using the pair of slots on the bottom of the unit. The access point can be

mounted on to any plaster, wood, or cement wall surface using the provided wall

anchors when necessary. The illustration on the next page shows a lengthwise mount.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 45 46

Pas de commentaire

Motorola AP-650 Series Guide d'installation Page 15