Motorola AP-6521 Series Guide d'installation télécharger pdf (Page 16)

AP-6521 Series Access Point Installation Guide

5. Verify the behavior of the access point LEDs. For more information, see “LED Indicator” on

page 15.

6. Align the bottom of the ceiling T-bar with the back of the access point.

7. Orient the access point chassis by its length and the length of the ceiling T-bar.

8. Rotate the access point chassis 45 degrees clockwise.

9. Push the back of the access point chassis on to the bottom of the ceiling T-bar.

10. Rotate the access point chassis 45 degrees counter-clockwise. The clips click as they fasten

to the T-bar.

11. Verify the behavior of the access point LEDs. For more information, see “

LED Indicator” on

page 15.

12. The access point is ready to configure. For information on basic access point device

configuration, see “

Defining a Basic Configuration” on page 17.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

Pas de commentaire

Motorola AP-6521 Series Guide d'installation Page 16