Motorola AP-6521 Series Guide d'installation télécharger pdf (Page 32)

AP-6521 Series Access Point Installation Guide

• The port connected to the WAN - Select the port used as the physical access point

connection to the external network. This ports available differ depending on the access

point model deployed. Access point models with a single port have this option fixed.

• Enable NAT on the WAN Interface - Select the checkbox to allow traffic to pass between

the access point's WAN and LAN interfaces.

16. Select Next. The Initial AP Setup Wizard displays the Radio Configuration screen to

define support for the 2.4GHz radio band, 5GHz radio band or to set the radio's functionality

as a dedicated sensor. An AP-6521 is supports a single dual-band radio.

NOTE The ADSP Sensor Support field displays at the bottom of the screen

only if a radio has been dedicated as a sensor.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 55 56

Pas de commentaire

Motorola AP-6521 Series Guide d'installation Page 32