Motorola MICOM-2TS Spécifications télécharger pdf (Page 15)

Introduction

This Supplement to the “MICOM-2E/2R ALE HF-SSB Transceiver Owner’s Guide”,

Publication 68P02952C60-A, provides you with information on additional features,

options and MICOM-2 models, which are not documented in the Owner’s Guide.

The information presented in this Supplement covers the new versions (Version CK)

of the MICOM-2E/2RS/2TS ALE HF-SSB transceivers. The new versions use

enhanced hardware and provide additional ALE capabilities.

Externally, the new versions are similar to the previous MICOM-2. However,

changes have been made in the wiring of the 44-pin accessories connector located on

the rear panel, relative to the 44-pin connector used by the previous versions.

The information appearing in this Supplement is intended for use with the Owner’s

Guide, MICOM-2E/2RS/2TS ALE HF-SSB Transceivers, Publication

68P02952C60-A.

New Model Information

The new transceiver versions have been assigned new model numbers, as follows:

MICOM-2ES Model M80AMNOKV5CK

MICOM-2ETS Model M81AMNOKV5CK

MICOM-2RS Model M85AMNOKV5CK

44-Pin Accessories Connector

Table 1 lists the current functions of the 44-pin accessories connector, J5.

Asterisks * appear in the Designation column next to the pins whose function has

changed, relative to previous equipment versions.

Notes

1. The information appearing in Table 1 supersedes any previous

information provided in the Owner’s Guide (Publication

68P02952C60-A).

2. You can continue using the fixed adapter accessory for

MICOM-2ES, MICOM-2ETS and MICOM-2RS (Part No.

09MB000011). This accessory interfaces between the 44-pin

connector and older 25-pin accessories.

_________________________________________________________________________________________________

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

Pas de commentaire

Motorola MICOM-2TS Spécifications Page 15