Motorola LS6000B-U Guide de l'utilisateur télécharger pdf (Page 96)

LS 6000 Scintillation System User’s Manual

PN 247971-F

5-18

Data Calculation

Xtal SL DPM % of Reference

Xtal SL DPM % of Reference (if installed) is available when Xtal is selected as the scintillator.

Single and Dual Label DPM % of Reference (if installed) is available when a liquid scintillator

is selected. Refer to Section 5.7 for information on DPM % of Reference.

Setting Up Xtal SL DPM % of Reference

When editing a User Program, from the Data Calculation Menu (Figure 5.1), choose XTAL SL

DPM%Ref. The prompts displayed on the menu are the same as described for the Xtal DPM

program. Refer to Setting Up Xtal DPM Section 5 for information on these prompts.

Loading Samples for Xtal SL DPM% of Reference

Since the instrument has no way of distinguishing among blanks, standards, references, and

unknowns, a convention has been established for identifying them by the sequence in which

they are loaded. An example loading sequence is shown in Figure 5.16.

Figure 5.15 Typical Printout for DL DPM % of Reference

% Ref

Sample DPM - Blank CDM x 100 x Factor

Reference DPM - Blank DPM

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 179 180

Pas de commentaire

Motorola LS6000B-U Guide de l'utilisateur Page 96