Motorola Command One Spécifications télécharger pdf (Page 34)

February 23, 2000 Motorola Personal Communications Sector Page 28

Satellite Subscriber Products Division

Motorola Personal Communications Sector

Satellite Subscriber Products Division

ISU AT Command Reference Extended Cellular Commands (+C)

where <code> can be one of the following:

READY ISU is not pending for any password

SIM PIN ISU is waiting for SIM PIN to be given

SIM PUK ISU is waiting for SIM PUK to be given

SIM PIN2 ISU is waiting for SIM PIN2 to be given

SIM PUK2 ISU is waiting for SIM PUK2 to be given

4.26 +CPMS - Select Preferred SMS Message Storage

Set Command: +CPMS=<mem1>[, <mem2>[,<mem3>]]

Set command selects memory storages <mem1>, <mem2> and <mem3>. <mem1> is the memory from

which messages are read and deleted; <mem2> is the memory to which writing and sending operations are

made; <mem3> is the memory to which received SMS messages are to be stored. If a chosen storage is not

appropriate for the phone, ﬁnal result code +CMS ERROR: <cms_err> is returned.

Valid values for <mem1>, <mem2> and <mem3> are:

"SM" SIM message storage

Response is in the form:

+CPMS: <used1>,<total1>,<used2>,<total2>,<used3>,<total3>

where <used1>: number of messages currently in <mem1>

<total1>: total number of message locations in <mem1>

<used2>: number of messages currently in <mem2>

<total2>: total number of message locations in <mem2>

<used3>: number of messages currently in <mem3>

<total3>: total number of message locations in <mem3>

Read Command: +CPMS?

Read command returns the current storage selected, usage and capacity. Response is in the form:

+CPMS: <mem1>,<used1>,<total1>,<mem2>,<used2>,<total2>,

Test Command: +CPMS=?

Test command returns lists of memory storages supported by the phone. Response is in the form:

+CPMS: (list of supported <mem1>s),(list of supported <mem2>s),

(list of supported <mem3>s)

4.27 +CPWD - Change Password

Exec Command: +CPWD=<fac>,<oldpwd>,<newpwd>

This command sets a new password for the facility lock function deﬁned by the AT command Facility Lock

+CLCK plus PIN2.

<fac>:

"CS" CNTRL surface (phone lock)

"SC" SIM (lock SIM card)

"P2" SIM PIN2

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 60 61

Pas de commentaire

Motorola Command One Spécifications Page 34