Motorola Command One Spécifications Page 55

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 61
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 54
February 23, 2000 Motorola Personal Communications Sector Page 49
Satellite Subscriber Products Division
Motorola Personal Communications Sector
Satellite Subscriber Products Division
ISU AT Command Reference S-Register Definitions
10.2 Iridium Specific S-Register Extensions
S23 0-255 27 Bitmap register where bits 1, 2 and 3 reflect the
DTE baud rate and bits 4 and 5 reflect the DTE par-
ity.
S25 0-255 5 Sets length of time in hundredths of a second that a
change in the DTR status has to persist for before it
is recognized.
S27 0-255 9 Bitmap register where bits 0, 1 and 3 reflect the
&Qn setting.
S30 0-255 0 Disconnect activity timer. Timer used to determine
how long the call connection been inactive. If the
inactivity time is greater than the value contained in
the register, in 10s of seconds, then the hang-up pro-
cess is entered. A value of 0 disables this function.
S31 0-255 0 Bitmap register where bits 2 and 3 reflect the Wn
setting.
S36 0-255 7 Bitmap register where bits 0, 1 and 2 reflect the \Nn
setting.
No action, compatibility only
S39 0-255 3 Bitmap register where bits 0, 1 and 2 reflect the
&Kn setting.
S40 0-255 192 Bitmap register where bits 6 and 7 reflect the \An
setting, bits 3-5 reflects the \Kn setting.
No action, compatibility only
S41 0-255 3 Bitmap register where bits 0 and 1 reflect the %Cn
setting.
No action, compatibility only
S95 0-255 0 Bitmap register for extended result codes (overrides
Wn setting).
0 = CONNECT shows DCE speed
2 = Enable CARRIER XXXX
3 = Enable PROTOCOL: XXXX
5 = Enable COMPRESSION: XXXX
Register
Number
Range Default Description
S13 0-255 0
Bitmap register where bits 0-1 reflect the DCE data
bits, bits 2-3 reflect the DCE stop bits, bits 4-6
reflect the DCE parity settings.
Table 2: Iridium-Specific S-Registers
Table 1: Standard S-Registers
Vue de la page 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 61

Commentaires sur ces manuels

Pas de commentaire