Motorola Phaser P460 Instructions d'exploitation Page 25
- Page / 208
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
2-6
P460/P360 Memory Scanners Product Reference Guide
3. For the scanner cable, plug the power supply cable into the power supply port on
the housing of the host connector. For the cradle cable, plug the power supply
cable into the Power port on the bottom of the cradle.
4. Connect the power supply into an AC receptacle.
Using A Synapse Cable with the Cradle
1. Connect the Synapse Adapter cable to COM1 in the cradle.
2. Connect the Adapter cable to the Synapse Interface cable.
3. The Synapse Adapter cable has a flying power lead. Connect this lead to the
receptacle in the Synapse Interface cable, as shown below. See the Synapse
guide for details.
Figure 2-4. Synapse and Adapter Cable
4. Connect the Synapse Interface cable to the host.
5. Connect an appropriate power supply to the power receptacle on the cradle. The
indicator light on the cradle blinks, signifying successful power-up.
Using a Synapse Cable with the Scanner
1. Connect the Synapse Adapter cable into the bottom of the scanner.
2. Connect the Synapse Adapter cable to the Synapse Interface cable .
3. Connect the Synapse Adapter cable’s flying power lead to the receptacle in the
Synapse Interface cable (refer to Figure 2-4).
Synapse
Adapter Cable
Flying Power Lead
To Host
To Cradle
- P460/P360 Memory 1
- Scanners 1
- Product Reference Guide 1
- P460/P360 Memory Scanners 2
- Contents 4
- Chapter 3. Operation 5
- Chapter 5. Parameter Menus 6
- Feedback 9
- About This Manual 10
- Related Publications 11
- Service Information 11
- Symbol Support Center 12
- Warranty 14
- Chapter 1 16
- The Phaser Series Scanner 16
- The Cradle 17
- Chapter 2 20
- Setting Up the Cradle 22
- Scanner Power Options 23
- Charging the Battery 23
- Battery Charge 24
- Connecting to a Host 24
- Adapter Cable 25
- Flying Power Lead 25
- To Cradle 25
- Chapter 3 28
- Operation 28
- Initial Powerup 29
- Batch / Inventory Application 29
- Numeric Data Entry 30
- Alpha Data Entry 30
- Quantity: _____ 31
- CODE: xxxx 31
- aaaa/bbbb 31
- Transmitting Data to the Host 32
- Daisy-Chaining Cradles 33
- Scan and Transmit Application 33
- System Menu 34
- System Setup 35
- App. Control 36
- Parameter Control 39
- System Status 39
- ADF Plus 40
- Scanning 41
- Right Wrong 42
- Te s t S y m b o l s 43
- Symbol Technologies, Inc 44
- Depth of Field 46
- Keypad Operation 48
- Troubleshooting 50
- You Should 51
- Chapter 4 52
- Replacing the Battery 53
- Accessories 54
- Technical Specifications 55
- Pin-outs 57
- Table 4-5. Scanner Pin-outs 58
- Beeper Indications 59
- Chapter 5 60
- Table 5-1. Default Tabl e 61
- Set Default Parameter 68
- Communication Protocol 69
- Batch/Inventory Application 70
- Host Type 71
- Sleep Time 74
- Date Separator 75
- Hour Type 76
- Decimal Separator 77
- Date Format 78
- Key Click 79
- Laser On Time 80
- Scan Stand Options 81
- Timeout Between Decodes 82
- The Same Symbol 82
- Different Symbols 82
- Beeper Options 84
- Beeper Volume 85
- Power Detect Beep 86
- Beep After Good Decode 87
- Decode Options 88
- Enable/Disable EAN-8/EAN-13 90
- Enable/Disable Bookland EAN 91
- Decode UPC/EAN Supplementals 92
- DECODE UPC/EAN 93
- SUPPLEMENTAL REDUNDANCY 93
- UPC-E, or UPC-E1 check digit 94
- UPC-A Preamble 95
- UPC-E Preamble 96
- UPC-E1 Preamble 97
- Convert UPC-E to UPC-A 98
- Convert UPC-E1 to UPC-A 99
- EAN Zero Extend 100
- Convert EAN-8 to EAN-13 Type 101
- UPC/EAN Coupon Code 102
- Enable/Disable Code 128 103
- Lengths for Code 128 104
- Enable/Disable UCC/EAN-128 104
- Enable ISBT 128 105
- Disable ISBT 128 105
- Enable/Disable Code 39 106
- ENABLE TRIOPTIC CODE 39 107
- DISABLE TRIOPTIC CODE 39 107
- Set Lengths for Code 39 108
- CODE 39 - LENGTH WITHIN RANGE 109
- CODE 39 - ANY LENGTH 109
- Parameter Menus 110
- ENABLE CODE 39 CHECK DIGIT 110
- DISABLE CODE 39 CHECK DIGIT 110
- Transmit Code 39 Check Digit 111
- ENABLE CODE 39 FULL ASCII 112
- DISABLE CODE 39 FULL ASCII 112
- Convert Code 39 to Code 32 113
- Code 32 Prefix 114
- Enable/Disable Code 93 115
- Set Lengths for Code 93 116
- CODE 93 - LENGTH WITHIN RANGE 117
- CODE 93 - ANY LENGTH 117
- ENABLE INTERLEAVED 2 OF 5 118
- DISABLE INTERLEAVED 2 OF 5 118
- I 2 of 5 - ANY LENGTH 120
- USS CHECK DIGIT 121
- OPCC CHECK DIGIT 121
- Transmit I 2 of 5 Check Digit 122
- Convert I 2 of 5 to EAN-13 123
- ENABLE DISCRETE 2 OF 5 124
- DISABLE DISCRETE 2 OF 5 124
- D 2 of 5 - ANY LENGTH 126
- Enable/Disable Codabar 127
- Set Lengths for Codabar 128
- CODABAR - LENGTH WITHIN RANGE 129
- CODABAR - ANY LENGTH 129
- CLSI Editing 130
- NOTIS Editing 131
- Enable/Disable MSI Plessey 132
- Set Lengths for MSI Plessey 133
- MSI PLESSEY - ANY LENGTH 134
- MSI Plessey Check Digits 135
- (ENABLE) 136
- (DISABLE) 136
- MOD 10/MOD 11 137
- MOD 10/MOD 10 137
- Enable/Disable PDF417 138
- PDF417 Scanning Mode 139
- Raster Height (Default 15) 140
- (Continued) 141
- Aiming Mode 142
- Enable/Disable MicroPDF 143
- Code 128 Emulation 144
- UCC/EAN-128 Emulation 145
- Macro PDF Features 146
- Transmit Unknown Codewords 150
- Escape Characters 151
- Delete Character Set ECIs 152
- ECI Decoder 153
- Transmit File Name 154
- Transmit Block Count 155
- Transmit Time Stamp 155
- Transmit Sender 156
- Transmit Addressee 156
- Transmit Checksum 157
- Transmit File Size 157
- Last Blocker Marker 158
- Flush Macro Buffer 159
- Abort Macro PDF Entry 159
- Security Options 160
- Linear Security Level 3 161
- Linear Security Level 4 161
- Bi-directional Redundancy 162
- UPC/EAN Security Level 163
- UPC/EAN Security Level 2 164
- UPC/EAN Security Level 3 164
- RS-232C Parameters 165
- Baud Rate (Continued) 166
- Check Receive Errors 168
- Hardware Handshaking 169
- STANDARD RTS/CTS 170
- RTS/CTS OPTION 1 170
- Software Handshaking 171
- ACK/NAK with ENQ 172
- Host Serial Response Time-out 173
- RTS Line State 174
- Stop Bit Select 175
- ASCII Format 175
- Beep on <BEL> 176
- Intercharacter Delay 176
- MCL-Net Parameters 177
- MCL-Net Baud Rate (Continued) 178
- MCL-Net Hex Addressing Mode 179
- Scanner Address 179
- MCL-Net Transmit Retries 180
- MCL-Net Frame Timeout 180
- Numeric Bar Codes 181
- Numeric Bar Codes (Continued) 182
- Appendix A 184
- Bar Code Information 184
- AIM Code Identifiers 186
- Appendix B 196
- Messages and Error Codes 196
- Tell Us What You Think 206
- 70-37690-02 208
- Revision A — June 2001 208
Produits connexes et manuels pour Lecteurs de codes-barres Motorola Phaser P460
(2 pages)
(36 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.891 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels