Motorola Phaser P460 Instructions d'exploitation télécharger pdf (Page 48)

3-21

Operation

Keypad Operation

Instead of scanning a bar code, you can enter the bar code data using the keypad on the

top of the scanner. To enter numeric data, type the numeric value desired and press

<ENTER>. A beep lets you know that the entry was accepted. See Figure 3-6 on page 3-

22.

To enter alpha characters, press the <Mode> key once to put the scanner in Alpha Mode.

Numeric buttons 1 through 9 are associated with the alpha characters. For example, the

letters a, b and c are located on numeric button 7. Press the button with the letter you desire

- once for the letter a, twice for the letter b, or three times for the letter c. You can continue

entering alpha characters or switch to numerics. Press <ENTER> to save or send the data.

To return to numeric entry mode after entering alpha characters, press the <Mode> key

again. For example, to manually enter 17ABF5, do the following steps:

Every time you press the button with the letter you desire, you hear a low-pitched beep to

let you know that the entry was registered. Although the entry is registered, it has not been

transferred to the host yet. A high-pitched beep lets you know that the entry has been

transferred to the host.

To return to numeric mode, press the Mode key again. Pressing the Enter key saves the

data.

Data Action

1 Press numeric button 1.

7 Press numeric button 7.

A Press <MODE> button once, then numeric

button 7 once. Wait for one second (you will hear a

low pitched beep).

B Press numeric button 7 twice.

F Press numeric button 8 three times.

5 Press <MODE> button once, then numeric

button 5 once, then <ENTER>.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 207 208

Pas de commentaire

Motorola Phaser P460 Instructions d'exploitation Page 48