Motorola HK100 Manuel d'utilisateur télécharger pdf (Page 25)

Edge 5000i Gig-E IP Phone Bluetooth Module Set Up Guide 21

Using the Smart Phone

If your phone is connected to the smart phone, you can make or receive a smart phone

call via your Edge 5000i Gig-E IP Phone. The call still uses your smart phone, but the

audio path can be redirected to the handset to use the speakerphone or handset of your

Edge 5000i Gig-E IP Phone. You may handle only one call type at a time on the phone.

If you are already on a call over the Edge 5000i Gig-E IP Phone, you cannot make or

receive a call over Bluetooth from the smart phone. If you are already in a Bluetooth call

through the smart phone, then you cannot make another call over the Edge 5000i Gig-E

IP Phone.

Answer or Refuse a Smart Phone Call on your Edge 5000i Gig-E IP Phone

When you receive a smart phone call the phone extension icon will indicate that the

phone is ringing. You can receive the smart phone call by any of the following:

• Pressing the speaker button

• Lifting up the handset

• Pressing Answer soft button

If you press the Refuse soft button, the call is rejected.

Figure 36. Soft Keys for Answer and Refuse a Smart Phone Call

Transfer or End a Call

During a smart phone call that you’ve answered on your handset, you can transfer the

call back to your smart phone by pressing the A.Trns soft button. The call is transferred

to the smart phone and your handset phone is changed to the idle state. Also, if you

select the Bluetooth button in the smart phone and the call is transferred back to your

Edge 5000i Gig-E IP Phone again.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 38 39

Pas de commentaire

Motorola HK100 Manuel d'utilisateur Page 25