Motorola MICOM-2TS Spécifications télécharger pdf (Page 40)

MICOM-2ES/2RS/2TS ALE Supplement to Owner’s Guide

5. After the link is established, you will see a LINK

message. Now you may press the PTT and start

talking.

LINK

1234

MOTOROLA

SEND PAGE CHAN MONs

Note

If the link with the selected station cannot be set up, you will see

for a few seconds a flashing NO LINK message.

6. To disconnect the link, press the ESC key.

Note

If you want to call again the same station, double-press the PTT to

use the quick-call feature (see page 28).

➤ To transmit an individual call with MultiNet ON:

1. Press CALL (F1).

The radio displays the current net number, flashing.

If you wish to change the currently used net, press

the UP/DOWN keys or enter the net number on the

keypad.

ALE

NET# 7

MOTOROLA

2. Press ENTER to confirm the net number.

3. The radio displays the last called station.

CALL

1001

MOTOROLA

SEND PAGE CHAN MONs

Press the UP/DOWN keys to scroll between

stations, or use the keypad to enter a station name

and then press SAVE (F1) or ENTER when the

required station name appears.

CALL

1009

MOTOROLA

SEND PAGE CHAN MONs

4. Press SEND (F1) or ENTER to initiate the call

5. The radio now starts the link set up process. During this process, you will

see TO alternating with the number of the channel the set up request is

being sent (the channel may change, if the called station does not answer on

the first channel(s)).

Note

While the radio is initializing the link, you can press STOP (F1)

or ESC to abort the entire process.

_________________________________________________________________________________________________

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 75 76

Commentaires sur ces manuels

Pas de commentaire

Motorola MICOM-2TS Spécifications Page 40

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Motorola MICOM-2TS