Motorola MICOM-2TS Spécifications télécharger pdf (Page 48)

MICOM-2ES/2RS/2TS ALE Supplement to Owner’s Guide

➤ To send global AllCall using the ESC key:

1. Press ESC continuously for a few seconds. The

radio starts sending the GL AllCall.

During this process, you will see TO alternating with

the number of the channel on which the set up

request is being sent.

GL ALLCALL

MOTOROLA

STOP NET GRP ANYs

CH 2

GL ALLCALL

MOTOROLA

STOP NET GRP ANYs

Note

While the radio is initializing the link, you can press STOP (F1)

or ESC to abort the entire process.

2. After a delay, you will see LINK with a flashing GL

ALLCALL.

LINK

GL ALLCALL

MOTOROLA

3. Confirm the link set up by pressing ENTER or the

PTT. The GL ALLCALL message stops flashing,

and you can start talking.

LINK

GL ALLCALL

MOTOROLA

STOP PAGE GRP MONs

4. Press PAGE (F2) if you want to send a message.

See page 31 for details.

5. To end the call, press ESC.

END CALLING

MOTOROLA

➤ To send global AllCall using the CALL function:

1. Press CALL (F1).

The radio displays the last called address.

CALL

1001

MOTOROLA

SEND PAGE CHAN MONs

2. Press the UP/DOWN keys until you reach GL

ALLCALL.

CALL

GL ALLCALL

MOTOROLA

SEND PAGE CHAN MONs

3. Press PAGE (F2) if you want to add a message to the call. See page 30 for

details.

4. Press SEND (F1) or ENTER to start the call.

The call now proceeds as for call initiated by pressing the ESC key.

_________________________________________________________________________________________________

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 75 76

Commentaires sur ces manuels

Pas de commentaire

Motorola MICOM-2TS Spécifications Page 48

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Motorola MICOM-2TS