Motorola CPCI-6115 Manuel de service télécharger pdf (Page 172)

Memory Maps and Addresses

CPCI-6200 Installation and Use (6806800J66C)

172

The Tick Timer Counter is compared to the Compare Register. When they are equal, the tick

timer interrupt is asserted and the Overflow Counter is incremented. If the clear-on-compare

mode is enabled, the counter is also cleared. For periodic interrupts, this equation should be

used to calculate the compare register value for a specific period (T):

Compare register value = T (μs) x (1 / Reference clock frequency in MHz)

When programming the tick timer for periodic interrupts, the counter should be cleared to

zero by software and then enabled. If the counter does not initially start at 0, the time to the

first interrupt may be longer or shorter than expected. The rollover time for the counter is 71.6

minutes with the default 1 MHz reference clock.

7.4.27.4 Counter Registers

 Tick Timer 1 Counter Register–0xF202_0018 (32 bits)

 Tick Timer 2 Counter Register–0xF202_0028 (32 bits)

 Tick Timer 3 Counter Register–0xF202_0038 (32 bits)

 Tick Timer 4 Counter Register–0xF202_0048 (32 bits)

When enabled, the tick timer counter register increments with the reference clock value.

Software may read or write the counter at any time.

Table 7-57 Tick Timer Counter Register

Bit Field Operation Reset

31:0 Tick Timer Counter Value R/W 0

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 195 196

Pas de commentaire

Motorola CPCI-6115 Manuel de service Page 172